Step by Step Gaming PC build (Tutorial)

Step by Step Gaming PC build (Tutorial)


welcome back to another episode of our
we’re back again for another episode of buildlog here on kudocube brought to you by gordymax entertainment now based on the last video a few people had some
concerns about how the pc was built saying that it was sort of fast
forwarded sure so this time we got you what we’re gonna do is to sort of skip
the whole part speaking process and jump straight to the boot in a way that will
make it a little more concise so that you guys could get that picture and how
the whole process comes again so stick around and we have more to show you so
no long as these are the past are going to be used for the builds these are the
essentials so you have your motherboard CPU Ram hard drive which in this case is
an SSD this is for cooling we have a power supply here and this is the
traffic stop the best way in my opinion to do this is to do the build outside
the case and then put it inside so we have our motherboard and this is the
process of a river where there’s an i7 centers of energy gain so what you want
to do is to lift this hatch gently place your CPU on the sockets
now the little notches on the side for you to use as a guide but for good
measure just make sure that you can read a text from where you’re standing if
it’s in the right position then your fits in the right so then flip it gently
backwards on this and then lock it in place because we to feel like it’s going
to break but don’t panic it wouldn’t nothing to do is to apply
semifluid this gives the process of cool when you put the rule on top the best
way is to put in as little as possible as gently as possible
oops that’s actually a bit much but they should do that’s excessive a bit and
then we gently fits all right you want to put your round in the second and the
last slots so that you can run into a channel this gives you the maximum of
the Fox for two sticks of RAM we have to eat cake sticks here or running a
maximum of 16 gigabytes okay yeah Joe next up is the CPU cooler so
the back place for the cooler has benefited from behind as you see here
this is going to serve us a platform on which our liquid could add emphasis on
so now that we have the starts and everything else we’re going to gently
fit this here these are fitted according to the socket
so you’d have to check them on off your Columbia Valley so you have to check the
line of all solution and how to exactly installing do you recommend doing this
with a speed trap by the advantages this type of cooler is a liquid fula the main
liquid is in this portion here so once the liquid cools the forces on
the pump circle is a liquid through the chips this radiator the with the fits
are fine on here that whatever liquid comes to you so his second is back on to
the CPU and so on the hole okay so now that we have this nice and firm we can
get our keys out and do the rest of the build first thing you need to do here
especially since the case is tempered glass is you take the panels off keep
them somewhere safe because you don’t want them breaking wash it during the
build now the first company that I normally would put in is the power
supply since that’s where all the cables will be coming from and because we want
to need system we need to route our cables perfectly the shot here is going
to help because we can keep all the cables that we don’t need underneath the
shroud you fit in the hard drives because those wants will also be plugged
in from the back as you can see here we are fitting the SATA power for them SSD
and the other hard drives and all of these cables are routed from behind the
case okay so a motherboard goes in next it’s
a lot easier now because everything is already fitted on the motherboard so you
just need to screw it into place and ensure that’s all the screws are aligned
perfectly with what is on the chassis the cooler also needs to be locked in
firmly and then afterwards we just need to clean out the cables make sure that
nothing is sticking out of in a way that is shooting so as I said previously
that’s where the shard comes in we can use their ties to clean up the cables
and then hide anything that is not being used fitting a graphics card is probably
my favorite part of the process does something just about holding all that
power in your hand you fit that gently in and give it to the appropriate power
cables that it needs and this gives me a ban on i3 90s so that requires two eight
pins so once that is fitted we are basically done with the bill all that’s left is to install an
operating system make sure it actually powers Putin drivers and then it’s ready
to be shipped to the client thank you for sticking with us through this entire
bowl of your views and comments are very much needed in this case and we want to
know and better we find our process so if you liked it give us a like if you
didn’t you know what to do and if you’re a new here hit the subscribe button

Leave a Response

Your email address will not be published. Required fields are marked *

16 thoughts on “Step by Step Gaming PC build (Tutorial)”