How to Take Apart Your XBox 360

How to Take Apart Your XBox 360


How to Take Apart Your XBox 360. Taking apart your Xbox can be accomplished
with a few tools and instructions. You will need Xbox Flat head screwdriver T10
torx screwdriver and gloves (optional). Step 1. Disconnect all cords and aftermarket hardware
that are connected to your Xbox 360 console. Call Microsoft at 1-800-4-MYXBOX before taking
apart your Xbox 360 in case it may possibly still be under warranty, or for some other
guidance prior to voiding your warranty altogether. Step 2. Hold power button in for 3 seconds to discharge
any power still stored in the systems components. Step 3. Remove the hard drive by pressing in the button
on the top and pulling upwards. Step 4. Remove the faceplate by gripping it firmly
at the top and bottom of one end and pulling gently until it pops off. Do the same at the other end. Step 5. Remove the gray vents on the top and bottom
inserting a small flat head screwdriver between the vent and Xbox 360 and prying upwards. Step 6. Insert a small flat head screwdriver into
the small slots on the back of the console between the seam of the cases and push until
you hear a pop. Do the same for both top and bottom. Step 7. Pry the clips apart on the front of the Xbox
with a small flat head screwdriver or your fingernail to finish separating the cases. Step 8. Place your console on the floor with the back
facing you and the exposed metal facing up. Step 9. Unscrew all screws that hold the exposed metal
pan on with a T10 torx screwdriver. Keep the screws together in a safe spot so
you will have all of them when it comes time to put your Xbox back together. Step 10. Flip the console over. Step 11. Pull up on the top case to expose inner components
of your Xbox 360 console and your finished. Did you know In 2007, Xbox Live added a new
subscriber every 8 seconds.

Leave a Response

Your email address will not be published. Required fields are marked *

100 thoughts on “How to Take Apart Your XBox 360”